User manual
RAZ-RCP-1 user manual
Everything from unpacking the device to the first hours report. Describes software version 63 — your own version is shown in the panel, under device status.
Before you start
- The label on the enclosure. It carries the hotspot name and TWO different passwords: one for WiFi, one for the panel.
- A phone or laptop with WiFi. A network cable is useful later, but not needed to set the device up.
- Employee cards. The device reads their numbers for you.
Contents
- 1Mounting and wiringWhere to put the reader, what to wire to the relay output, and why metal behind the enclosure ruins the range.
- 2First startFrom power-up to the first card. Ten minutes, with nothing to install.
- 3Panel: sign-in and accountsTwo accounts with different rights, password rules, lockout after failed attempts and the second factor.
- 4Employees and cardsHow to read a card number, tie it to a person, and decide who may present a card at all.
- 5Entries and exitsHow the device knows whether someone is arriving or leaving, and what happens after a correction in the panel.
- 6Relay and lockThree working modes, pulse length and opening from the panel.
- 7Network and panel accessThe hotspot, your company network, the name on the local network and setting the clock.
- 8Certificate and browser warningWhy the browser warns you on the first visit, and three ways to make it stop.
- 9Payroll integrationSending punches to an external system automatically, and one decision to take deliberately.
- 10Software updatesUpdating from the panel, uploading a file, and what happens when something goes wrong.
- 11LED and soundsThe complete list of signals. The device speaks in colour and sound so nobody has to look at the panel.
- 12TroubleshootingSymptoms our customers report, and the first things to check.
- 13SpecificationsWhat follows from the device software. Mechanical data is on the rating plate and in the datasheet.
Not finding what you need?
Write to us and quote the device number from the label. You will get a specific answer, not a link back to this manual.